Din webbläsare stöds ej. För bästa upplevelsen rekommenderas en nyare version eller en annan webbläsare.
För att ge dig bättre service använder vi cookies. Genom att fortsätta på sidan godkänner du vår användning av cookies.

SL Mobile

d&b KSL-8 Loudspeaker NLT4F
Z0780.000
KSL8 Loudspeaker
Medium to large format 3-way line array loudspeaker
  • Components LF: 2 x 10" + 2 x 8"; MF: 1 x 8"; HF: 2 x 1.4" exit compression driver with 3" coil
  • Dispersion 80°
  • SPLmax 145 dB
  • Weight 58 kg / 128 lbs

The KSL8 line array module produces an 80° constant directivity dispersion pattern in the horizontal plane over the entire operating bandwidth. The KSL8 houses two 10" neodymium forward facing LF drivers and two side firing 8" neodymium LF drivers. A coaxial mid-high section contains an MF horn with an 8" driver and two 1.4" exit, 3" voice coil HF compression drivers mounted to a dedicated wave shaping device. SL-Series flying hardware comes with a patended workflow with integrated tension and compression rigging modes, allowing splay angles between cabinets from 0° to 10° in 1° increments. The loudspeakers are driven actively by two channels of an appropriate d&b amplifier. One channel powers the 10” LF drivers, the second channel powers all other components, which are passively crossed-over. This component geometry allows for a smooth crossover design with well-defined overlaps between adjacent bands providing consistent, even and very accurate horizontal dispersion. Due to the arrangement of the front and side firing LF drivers, seamless directivity control is maintained from the lowest frequencies the loudspeaker produces to above 18 kHz. Further expanding flexibility and catering for applications where smaller arrays are used and ArrayProcessing is not required, the KSL8 includes the option to link two cabinets in Line or Arc mode. The cabinets are constructed from marine plywood and have an impact and weather protected PCP (Polyurea Cabinet Protection) finish. The front and side panels incorporate rigid metal grills backed by an acoustically transparent and water repellent fabric. Each side panel incorporates a recessed handle, with additional handles provided at the rear.

Technical Specifications

Frequency response (-5 dB standard): 54 Hz - 18 kHz
Frequency response (-5 dB CUT mode): 75 Hz - 18 kHz
Max. sound pressure (1m, free field) with D80 145dB
Cabinets per D80 (ArrayProcessing) 2
Cabinets pr D80 (Line or Arc mode) 4
Nominal impedance front LF 8 Ω
Nominal impedance side LF/MF/HF 8 Ω
Power handling capacity front LF (RMS/peak 10 ms): 450/1800 W
Power handling capacity side LF/MF/HF (RMS/peak 10 ms): 250/1000 W
Nominal dispersion angle (h x v): 80°
Splay angle settings 0 … 10° (1° increment)
Components 2 x 10" front LF driver
 
2 x 8" side LF driver
1 x 8" MF driver
2 x 1.4" exit compression driver with 3" voice coil
passive crossover network
Dimensions (H x W x D): 330 x 1000 x 597 mm
Weight: 58 kg
d&b KSL-12 Loudspeaker NLT4F/M
Z0781.000

KSL8 Loudspeaker

The KSL12 line array module produces an 120° constant directivity dispersion pattern in the horizontal plane over the entire operating bandwidth. The KSL12 houses two 10" neodymium forward facing LF drivers and two side firing 8" neodymium LF drivers. A coaxial mid-high section contains an MF horn with an 8" driver and two 1.4" exit, 3" voice coil HF compression drivers mounted to a dedicated wave shaping device. SL-Series flying hardware comes with a patended workflow with integrated tension and compression rigging modes, allowing splay angles between cabinets from 0° to 10° in 1° increments. The loudspeakers are driven actively by two channels of an appropriate d&b amplifier. One channel powers the 10” LF drivers, the second channel powers all other components, which are passively crossed-over. This component geometry allows for a smooth crossover design with well-defined overlaps between adjacent bands providing consistent, even and very accurate horizontal dispersion. Due to the arrangement of the front and side firing LF drivers, seamless directivity control is maintained from the lowest frequencies the loudspeaker produces to above 18 kHz. Further expanding flexibility and catering for applications where smaller arrays are used and ArrayProcessing is not required, the KSL12 includes the option to link two cabinets in Line or Arc mode. The cabinets are constructed from marine plywood and have an impact and weather protected PCP (Polyurea Cabinet Protection) finish. The front and side panels incorporate rigid metal grills backed by an acoustically transparent and water repellent fabric. Each side panel incorporates a recessed handle, with additional handles provided at the rear.

Technical Specifications

Frequency response (-5 dB standard): 54 Hz - 18 kHz

Frequency response (-5 dB CUT mode): 75 Hz - 18 kHz

Max. sound pressure (1m, free field) with D80 144dB

Cabinets per D80 (ArrayProcessing) 2

Cabinets pr D80 (Line or Arc mode) 4

Nominal impedance front LF 8 Ω

Nominal impedance side LF/MF/HF 8 Ω

Power handling capacity front LF (RMS/peak 10 ms): 450/1800 W

Power handling capacity side LF/MF/HF (RMS/peak 10 ms): 250/1000 W

Nominal dispersion angle (h x v): 120°

Splay angle settings 0 … 10° (1° increment)

Components 2 x 10" front LF driver

  2 x 8" side LF driver

1 x 8" MF driver

2 x 1.4" exit compression driver with 3" voice coil

passive crossover network

Dimensions (H x W x D): 330 x 1000 x 597 mm

Weight: 58 kg

d&b KSL-SUB Subwoofer NLT4F
Z0785.000
d&b SL-SUB Subwoofer NLT4F
Z0760.000
Pris exkl.119 180.00

Produkten har lagts i din varukorg Visa varukorgenTill kassan