Install A

Augmented arrays

• Installation specific medium format 2-way augmented array loudspeaker
• Components 2 x 10" LF driver, 1 x 1.4” exit compression driver with 3" coil
• Dispersion 60° x 30°
• SPLmax 139 dB
• Weight 22 kg

The ALi60 is the installation variant of the AL60 augmented array loudspeaker for medium scale sound reinforcement. When the AL Flyingframe top is used, up to four cabinet modules can be flown in vertical columns producing a 60° constant directivity dispersion pattern in the horizontal plane. The ALi60 can also be applied as horizontal array of maximum four loudspeakers using the AL Flying adapter.  The ALi60 loudspeaker module is a passive 2-Way design housing two x 10" neodymium LF drivers and one 1.4" exit HF compression driver with 3" diaphragms mounted to a dedicated wave shaping device and a passive crossover network. The wave segments of each cabinet couple without gaps and sum up coherently. Variable splay angles between adjacent cabinets can be set in a range of +/- 10° in 5° increments resulting in a total coverage of 50° up to 70° for two cabinets, up to a maximum of 150°per array. All components are arranged symmetrically around the center axis of the cabinet to produce a perfect symmetrical dispersion pattern. Broadband horizontal dispersion control is maintained down to approximately 550 Hz. The cabinet enclosure is constructed from marine plywood with an impact resistant black paint finish. The front of the loudspeaker cabinet is protected by a rigid metal grill backed by an acoustically transparent fabric. Three M10 threaded inserts are incorporated in one side panel to allow the secure attachment of a dedicated flying adapter.

Augmented arrays

• Installation specific medium format 2-way augmented array loudspeaker
• Components 2 x 10" LF driver, 1 x 1.4” exit compression driver with 3" coil
• Dispersion 60° x 30°
• SPLmax 139 dB
• Weight 22 kg

The ALi60 is the installation variant of the AL60 augmented array loudspeaker for medium scale sound reinforcement. When the AL Flyingframe top is used, up to four cabinet modules can be flown in vertical columns producing a 60° constant directivity dispersion pattern in the horizontal plane. The ALi60 can also be applied as horizontal array of maximum four loudspeakers using the AL Flying adapter.  The ALi60 loudspeaker module is a passive 2-Way design housing two x 10" neodymium LF drivers and one 1.4" exit HF compression driver with 3" diaphragms mounted to a dedicated wave shaping device and a passive crossover network. The wave segments of each cabinet couple without gaps and sum up coherently. Variable splay angles between adjacent cabinets can be set in a range of +/- 10° in 5° increments resulting in a total coverage of 50° up to 70° for two cabinets, up to a maximum of 150°per array. All components are arranged symmetrically around the center axis of the cabinet to produce a perfect symmetrical dispersion pattern. Broadband horizontal dispersion control is maintained down to approximately 550 Hz. The cabinet enclosure is constructed from marine plywood with an impact resistant black paint finish. The front of the loudspeaker cabinet is protected by a rigid metal grill backed by an acoustically transparent fabric. Three M10 threaded inserts are incorporated in one side panel to allow the secure attachment of a dedicated flying adapter.

The paint finish of all loudspeaker cabinets and most accessories can be executed in almost any custom colour in accordance with common colour tables. All rigging fittings at the rear of the cabinet, Front links and Locking pins remain in black. Other paint finishes such as metallic are available on request. The acoustically transparent foam fitted behind the rigid metal grill is also painted with the requested special colour.

Augmented arrays

• Installation specific medium format 2-way augmented array loudspeaker
• Components 2 x 10" LF driver, 1 x 1.4” exit compression driver with 3" coil
• Dispersion 60° x 30°
• SPLmax 139 dB
• Weight 22 kg

The ALi60 is the installation variant of the AL60 augmented array loudspeaker for medium scale sound reinforcement. When the AL Flyingframe top is used, up to four cabinet modules can be flown in vertical columns producing a 60° constant directivity dispersion pattern in the horizontal plane. The ALi60 can also be applied as horizontal array of maximum four loudspeakers using the AL Flying adapter.  The ALi60 loudspeaker module is a passive 2-Way design housing two x 10" neodymium LF drivers and one 1.4" exit HF compression driver with 3" diaphragms mounted to a dedicated wave shaping device and a passive crossover network. The wave segments of each cabinet couple without gaps and sum up coherently. Variable splay angles between adjacent cabinets can be set in a range of +/- 10° in 5° increments resulting in a total coverage of 50° up to 70° for two cabinets, up to a maximum of 150°per array. All components are arranged symmetrically around the center axis of the cabinet to produce a perfect symmetrical dispersion pattern. Broadband horizontal dispersion control is maintained down to approximately 550 Hz. The cabinet enclosure is constructed from marine plywood with an impact resistant black paint finish. The front of the loudspeaker cabinet is protected by a rigid metal grill backed by an acoustically transparent fabric. Three M10 threaded inserts are incorporated in one side panel to allow the secure attachment of a dedicated flying adapter.

The WR option provides an IP54 rating, and enables operation of loudspeakers in changing ambient conditions, with some loudspeakers able to achieve an IP55 rating. However it is not intended to enable permanent, unprotected operation of loudspeakers outdoors. Cabinets used outdoors even with the WR option should always be aimed either horizontally or with a downward tilt. All WR speakers will be delivered without a cable.

Augmented arrays

• Installation specific medium format 2-way augmented array loudspeaker
• Components 2 x 10" LF driver, 1 x 1.4” exit compression driver with 3" coil
• Dispersion 90° x 30°
• SPLmax 139 dB
• Weight 22 kg

The ALi90 is the installation variant of the AL90 augmented array loudspeaker for medium scale sound reinforcement. When the AL Flyingframe is used, up to four cabinet modules can be flown in vertical columns producing a 90° constant directivity dispersion pattern in the horizontal plane. The ALi90 can also be applied as horizontal array of maximum four loudspeakers using the AL Flying adapter.  The ALi90 loudspeaker module is a passive 2-Way design housing two x 10" neodymium LF drivers and one 1.4" exit HF compression driver with a 3" diaphragm mounted to a dedicated wave shaping device and a passive crossover network. The wave segments of each cabinet couple without gaps and sum up coherently. Variable splay angles between adjacent cabinets can be set in a range of +/- 10° in 5° increments resulting in a total coverage of 50° up to 70° for two cabinets, up to a maximum of 150°per array. All components are arranged symmetrically around the center axis of the cabinet to produce a perfect symmetrical dispersion pattern. Broadband horizontal dispersion control is maintained down to approximately 370 Hz. The cabinet enclosure is constructed from marine plywood with an impact resistant black paint finish. The front of the loudspeaker cabinet is protected by a rigid metal grill backed by an acoustically transparent fabric. Three M10 threaded inserts are incorporated in one side panel to allow the secure attachment of a dedicated flying adapter.

Augmented arrays

• Installation specific medium format 2-way augmented array loudspeaker
• Components 2 x 10" LF driver, 1 x 1.4” exit compression driver with 3" coil
• Dispersion 90° x 30°
• SPLmax 139 dB
• Weight 22 kg

The ALi90 is the installation variant of the AL90 augmented array loudspeaker for medium scale sound reinforcement. When the AL Flyingframe is used, up to four cabinet modules can be flown in vertical columns producing a 90° constant directivity dispersion pattern in the horizontal plane. The ALi90 can also be applied as horizontal array of maximum four loudspeakers using the AL Flying adapter.  The ALi90 loudspeaker module is a passive 2-Way design housing two x 10" neodymium LF drivers and one 1.4" exit HF compression driver with a 3" diaphragm mounted to a dedicated wave shaping device and a passive crossover network. The wave segments of each cabinet couple without gaps and sum up coherently. Variable splay angles between adjacent cabinets can be set in a range of +/- 10° in 5° increments resulting in a total coverage of 50° up to 70° for two cabinets, up to a maximum of 150°per array. All components are arranged symmetrically around the center axis of the cabinet to produce a perfect symmetrical dispersion pattern. Broadband horizontal dispersion control is maintained down to approximately 370 Hz. The cabinet enclosure is constructed from marine plywood with an impact resistant black paint finish. The front of the loudspeaker cabinet is protected by a rigid metal grill backed by an acoustically transparent fabric. Three M10 threaded inserts are incorporated in one side panel to allow the secure attachment of a dedicated flying adapter.

The paint finish of all loudspeaker cabinets and most accessories can be executed in almost any custom colour in accordance with common colour tables. All rigging fittings at the rear of the cabinet, Front links and Locking pins remain in black. Other paint finishes such as metallic are available on request. The acoustically transparent foam fitted behind the rigid metal grill is also painted with the requested special colour.

Augmented arrays

• Installation specific medium format 2-way augmented array loudspeaker
• Components 2 x 10" LF driver, 1 x 1.4” exit compression driver with 3" coil
• Dispersion 90° x 30°
• SPLmax 139 dB
• Weight 22 kg

The ALi90 is the installation variant of the AL90 augmented array loudspeaker for medium scale sound reinforcement. When the AL Flyingframe top is used, up to four cabinet modules can be flown in vertical columns producing a 90° constant directivity dispersion pattern in the horizontal plane. The ALi90 can also be applied as horizontal array of maximum four loudspeakers using the AL Flying adapter.  The ALi90 loudspeaker module is a passive 2-Way design housing two x 10" neodymium LF drivers and one 1.4" exit HF compression driver with 3" diaphragms mounted to a dedicated wave shaping device and a passive crossover network. The wave segments of each cabinet couple without gaps and sum up coherently. Variable splay angles between adjacent cabinets can be set in a range of +/- 10° in 5° increments resulting in a total coverage of 50° up to 70° for two cabinets, up to a maximum of 150°per array. All components are arranged symmetrically around the center axis of the cabinet to produce a perfect symmetrical dispersion pattern. Broadband horizontal dispersion control is maintained down to approximately 370 Hz. The cabinet enclosure is constructed from marine plywood with an impact resistant black paint finish. The front of the loudspeaker cabinet is protected by a rigid metal grill backed by an acoustically transparent fabric. Three M10 threaded inserts are incorporated in one side panel to allow the secure attachment of a dedicated flying adapter.

The WR option provides an IP54 rating, and enables operation of loudspeakers in changing ambient conditions, with some loudspeakers able to achieve an IP55 rating. However it is not intended to enable permanent, unprotected operation of loudspeakers outdoors. Cabinets used outdoors even with the WR option should always be aimed either horizontally or with a downward tilt. All WR speakers will be delivered without a cable.