Produkten har lagts i din varukorg Visa varukorgenTill kassan
0 Produkter
Varukorg
Din webbläsare stöds ej. För bästa upplevelsen rekommenderas en nyare version eller en annan webbläsare.

Interface/Ljudkort

När du ansluter flera enheter hjälper ljudkortet dig att optimera signalöverföring och eliminera problem genom att ändra signalnivåer och erbjuder dig korrekta anslutningstyper.
Radial KL-8 Rackmount Keyboard Mixer
R800 1428 00
Radial KL-8 Rackmount Keyboard Mixer
Ultimate Keyboard Control
The KL-8 is a rackmount keyboard mixing station designed to provide complete control over a professional keyboard setup, both on-stage and in the recording studio.
  • Four stereo analog inputs for keyboards
  • Redundant USB connections for laptop soft-synths
  • Stereo Aux Send/Receive with optional footswitch control
  • Headphone outputs and cue switches for silent monitoring
  • Link multiple KL-8s for larger setups
Put yourself in control of the mix
The KL-8 is a powerful mixing station created with keyboard pros in mind, with a number of features designed specifically to streamline and enhance any keyboard setup. You can connect up to four keyboards in mono or stereo, with level controls, aux sends, and LED indicators for each. A stereo aux send/receive is available to feed rackmount reverbs and delays and effects pedals, or it can be used as an additional input for a fifth keyboard. MIDI and USB connections make it easy to control a laptop soft-synth, utilizing high quality 24bit/192kHz digital audio converters. The KL-8 also features multiple output options, with transformer-isolated XLR main outputs to feed the PA, monitor outputs for a set of speakers on stage, and dual headphone outputs for local monitoring and testing.
Redundant USB inputs
When you can't afford to have a break in the performance due to laptop failure, the KL-8 allows you to set up redundant laptop systems and seamlessly transition from one to another. A secondary USB input on the KL-8 allows you to keep your backup laptop at the ready - when failure occurs simply hit the USB select switch on the front panel or use the optional JR-1L remote footswitch to instantly switch to the backup system.
Silent cueing and monitoring via headphones
A built in headphone amp and dual 1/4" TRS outputs give you the option to practice and record silently, or cue up individual inputs on stage without feeding signal out to the audience over the PA system. Each input channel on the KL-8 is accompanied by a Cue switch that will remove that input from the main and monitor outputs and reroute it directly to the headphones, so you can easily adjust patch settings and test playback over USB without affecting the performance.

 

Radial Key-Largo
R800 1427 00
Radial Key-Largo Keyboard Mixer
Keyboard Mixer, USB Interface and Performance Pedal
The Key-Largo is a unique and powerful device that combines a multi-channel keyboard mixer with a USB audio interface, while providing the ability to control elements of the performance with footswitch control.
  • Three stereo analog inputs for keyboards
  • Digital USB connection for laptop soft-synths
  • On-board sustain and effects loop footswitches
  • Separate balanced outputs for the PA and stage monitors
A mixer for today's gigging keyboard player
Designed for stage use, the Key-Largo allows you to connect up to three stereo keyboards, effects and volume pedals, and a laptop computer via USB, managing all these signals to send a balanced audio feed to a PA system for a seamless performance on stage. Three stereo analog inputs feature individual volume controls to balance levels, and each can be sent to a shared effects loop to add reverb or delay in an instant using a dedicated footswitch. A USB connection allows laptop computers to be integrated into the setup for control of soft-synths, and a built-in sustain footswitch and connections for a stereo volume pedal provide additional ways to control your performance.
High headroom, low noise
A switch-mode power supply inside the Key-Largo elevates the rail voltage to 24 volts for extra headroom to handle the most dynamic digital keyboards and the hottest analog synths without fear of overload or distortion. This is paired with 24bit/192kHz digital audio converters for high quality audio over USB when playing soft-synths or pre-recorded tracks. To eliminate noise when connecting multiple devices on stage, the main outputs are transformer-isolated to eliminate hum and buzz from ground loops, and all outputs are equipped with ground lift switches to further reduce noise.
Radial J+4
R800 8015 00
Radial J+4 Stereo Line Driver
Balanced -10dB to +4dB Signal Driver
The J+4™ is a stereo interface designed to accept unbalanced low output devices such as instruments, computers or mobile devices and boost their signal to a balanced +4dB level for connection to professional audio recording and playback equipment.
  • Stereo preamp boost signals to +4dB balanced line level
  • Increases gain for low output instruments & music players
  • Transformer isolated to eliminate noise caused by ground loops
  • Multiple input connector options to interface with any device
Boost & balance any stereo signal
The J+4 allows you to boost nearly any stereo signal up to a +4dB balanced line level output, which can be sent over long distances without signal loss and connected directly to pro audio equipment such as mixers or recording interfaces. Multiple input connectors are available for integration with a variety of devices, including a stacked set of ¼" jacks for DJ mixers or keyboards, RCAs for CD players and a mini 3.5mm jack for smartphones and tablets. The J+4 delivers exceptional sonic performance, and is able to provide clean gain and eliminate noise by combining the advantages of active signal buffering with transformer isolation.

 

Radial JPC
R800 1026 00
Radial JPC™ Active Direct Box for Laptop Computers
The JPC is an analog stereo interface designed to help solve the hum and buzz problems commonly associated with connecting a computer or consumer playback device to an audio system.
  • Easy to use stereo interface for laptop computers
  • Active signal path with transformer isolation
  • Eliminates hum and buzz common to PCs
  • Multiple connector types for any audio source

Hybrid circuit for low noise
The JPC is a stereo direct box that is easy to use with practically any consumer electronic device. It utilizes active buffers and transformer isolation to create a hybrid circuit that blocks ground loops and reduces system noise, along with AC blocking capacitors to prevent any audio system noise from bleeding back into the computer. The choice of ¼", RCA and 3.5mm input connectors make it easy to interface with all types of unbalanced audio sources such as computers, smartphones, and tablets, and the outputs are XLR balanced mic level to feed snake systems and PAs. Powering the JPC is accomplished via 48V phantom from a mixing console, allowing the JPC to be used in concert environments without requiring an external power supply.
Radial McBoost
R800 8016 00
Radial McBoost Microphone Signal Intensifier
The McBoost™ is a microphone signal booster designed to elevate the output of a dynamic or ribbon microphone for greater transparency and clarity, and provide enough clean gain to connect to any preamp.
  • 26dB signal booster for dynamic & ribbon microphones
  • Class-A dual transistor circuit for transparent operation
  • Powered by 48V phantom power
  • Three-position impedance selector & variable gain
Boost your signal at the source
The Radial McBoost provides clean gain at the source for low-output dynamic and ribbon microphones, driving long cable runs with ease and allowing you to connect to any preamp as if it were a high-gain ribbon mic pre. Simply connect the McBoost in-line using standard XLR cables and activate 48V phantom to provide power, then select between three impedance settings to optimize the response from the microphone. The McBoost will elevate the output to produce added clarity, excitement and extra drive for long cables whether you are in a recording studio, on a live concert stage, or in a broadcast center.
Radial SGI
R800 1600 00
Radial SGI Guitar Interface System
The SGI™ is a high performance line driver system for guitars that takes an unbalanced instrument signal and allows you to drive it as far as 100 meters (300ft) without noise.
  • Balanced line driver for guitar and bass
  • Send signal over 100 meters (300ft) without loss
  • 100% discrete class-A circuit with Drag control
  • Delivers natural tone to off-stage amplifiers
Take your tone further
The SGI sends guitar signals across long distances without signal loss or noise, while retaining the original tone of the instrument. In the studio, it allows the guitarist to sit in the control room and connect to a distant guitar amp. On stage, the SGI can be used to play the guitar amp using off-stage isolation cabinets or it can be used to manage guitar signals to and from wireless systems, pedalboards and amplifiers. The SGI consists of two boxes: the SGI-TX transmitter and the SGI-RX receiver. The connection between the TX and RX is made using a standard balanced XLR microphone cable. To use, you simply plug your guitar into the SGI-TX input and connect your amp from the SGI-RX output and you are set to go. The SGI does all of the balancing, buffering and impedance matching for you.
Radial SGI44
R800 6700 00
Radial SGI-44 Guitar Signal Extender
The SGI-44™ is a line driver for guitars and basses that connects to the JX-44 to allow a remote pedalboard to be connected without signal loss or noise.
  • Balanced line driver for JX-44 guitar & amp switcher
  • Send signal over 100 meters (300ft) without loss
  • 100% discrete class-A circuit with Drag control
  • Bidirectional send & receive effects router
Connect to your pedalboard remotely
The SGI-44 can send guitar signals over long distances without signal loss or noise, with built-in send and receive functions for bidirectional signal routing. When used in conjunction with the JX-44 guitar and amp switcher, it allows you to keep your pedalboard at your feet on stage, while instrument switching and amp control is managed remotely by your stage tech. A pair of SGI-44s can also be used together to extend the effects loop of your amplifier to any point on stage, so you can keep your favorite pedals connected to the amp's effects loop no matter how far away your amp is located. The SGI-44 takes care of all the balancing, buffering, and impedance matching to ensure your signals are delivered without noise or distortion.
Radial StageBug SB-15 Tailbone
R800 0115 00
Radial StageBug SB-15 Signal Buffer & 9V to 15V converter
The Stagebug SB-15™ is a class-A signal buffer designed to sit at the beginning of the signal chain and drive multiple pedals without added noise or signal loss. It also converts two 9V power outputs to a 15V supply as an alternative way to power Radial and Tonebone 15V products.
  • 100% discrete class-A signal buffer
  • Drag control load correction for natural tone
  • Drives pedal chains up to 15 meters (50ft)
  • Converts two 9V supplies to 15V output
Drive pedal chains with ease
The SB-15 is an ultra-compact signal buffer that is pedalboard friendly, with transparent operation that maintains the natural tone of your instrument. Unlike many audio designs that employ ICs or integrated circuits to buffer the signal, the 100% discrete class-A design of the SB-15 reduces the need for phase-cancelling negative feedback produces a more natural and pleasing tone. This is complimented by a Drag control load correction circuit to replicate the tone and feel as if connected directly to the amplifier. Once buffered, the signal is less susceptible to hum and buzz caused by radio interference and electromagnetic fields, and is then able to drive multiple pedals distances of 15 meters (50') without noise.
Radial Shotgun
R800 7215 00
Shotgun - Instrument Buffer & Splitter
Four Output Guitar Amp Driver. The Shotgun is a compact guitar-level signal buffer designed to drive up to four amplifiers simultaneously while fitting easily on any pedalboard.
  • 1×4 mono or 2×2 stereo operation
  • Isolated outputs eliminate buzz and hum
  • Buffered outputs prevent signal loss
  • 180° polarity switches to phase-match amps
Feed four amps in mono or stereo
The Shotgun makes it easy to drive multiple amplifiers cleanly and in phase without buzz or hum from ground loops. In mono operation, connect to input-1 of the Shotgun and you can feed up to four amps simultaneously. For stereo setups, the Shotgun automatically reconfigures when both inputs are used; feeding input-1 to the first two amplifiers, and input-2 to the second pair. Isolation transformers and ground lifts are included on the outputs to eliminate ground loop noise, along with 180° polarity reverse switches to ensure all amps are phase-matched.
Radial SpaceHeater Summing mixer
R800 7050 00
Radial Space Heater 8-Channel Summing Mixer & Tube Drive
The Space Heater is an 8-channel tube overdrive that can be used as an analog summing mixer or as a multi-channel studio effects device, utilizing the tube circuitry for a range of effects from subtle warmth and grit to full  harmonic distortion.
  • 12AX7 vacuum tube overdrive & summing mixer
  • Heat switch adjusts voltage applied to each tube
  • Individual outputs to use as an 8-channel effects insert
  • Transformer-coupled outputs for vintage tone
Warm up your digital tracks
The Space Heater is a high performance summing mixer that allows you to blend tracks out-of-the-box in the analog domain, with oversized output transformers and vacuum tubes for vintage warmth and character. Eight mono input channels or four stereo pairs are available, with a heat switch on each pair to adjust the voltage on the 12AX7 tube - lower voltage settings starve the tube for a more pronounced distortion effect. Separate Drive and Level controls on each channel give you complete control over each tube circuit, providing a range of tones that allow you to fatten up digital stems or provide a distorted effect on vocals, guitars or drums.



Radial Dragster
R800 7075 00
Dragster - Load Correction
The Dragster™ is a super-compact load correction device that lets you adjust the load on your electric guitar pickup to replicate the sound as if connected directly to a tube guitar amp.
  • Adjusts the load on magnetic pickup for a natural sound
  • Warms up the tone of harsh sounding active buffers
  • Helps improve the sound of your wireless system
  • Compact and lightweight, can be used anywhere!
Tiny size, big tone
When a guitar is connected to a guitar amplifier, the pickup and the amp join together to form a circuit. But as soon as you introduce a buffer in between the pickup and the amplifier, the natural relationship is lost. The pickup only 'sees' the buffer and the tone changes. This is the fundamental reason why guitarists hate the sound of wireless systems and non-true-bypass pedals. The Dragster solves the problem by adjusting the impedance on your magnetic pickups, restoring the full rich tone of your instrument - simply connect your guitar or bass to the Dragster, set the thumb wheel to the sound you like and you are ready to go! The compact design makes it easy to fit on any pedalboard while the built-in mounting flanges make it a breeze to attach to a guitar strap.