För att ge dig bättre service använder vi cookies. Genom att fortsätta på sidan godkänner du vår användning av cookies.

Live

Produkter konsturerade för livekonserter som ger dig direkt möjlighet att omdirigera mikrofoner på scenen eller hantera komplexa gitarr- och keyboardsriggar. Du kan även med dessa produkter växla mellan olika uppspelningssystem.
Filtrera & sortera
Antal artiklar 10
Radial HotShot 48V
R800 1505 00
Radial HotShot 48V Condenser Microphone Switcher
Stage Toggle for Condenser Mics
The HotShot 48V is a condenser microphone switcher built for silent operation on stage, allowing an artist to power their vocal mic and reroute it to feed the stage monitoring system for communicating with other band members or technicians at the press of a footswitch. LED indicators display the active output, and the footswitch itself can be configured for latching or momentary action. While the HotShot 48V is specifically designed to address issues when switching condenser microphone outputs, it works equally well with dynamic mics also.
  • Provides 48V phantom power for condenser microphones
  • Redirects mic signal to communicate with band members and techs
  • Footswitch can be configured as a latching or a momentary switch
  • Silent switching with no pops or clicks through the PA system
  • + More Features
Silent condenser mic switching
Passive audio switchers occasionally create an audible pop during switching that can be heard through the PA system, disrupting the performance. This can be caused by the introduction of phantom power or by stray DC offset from any powered device connected to the switcher. The HotShot 48V employs active circuitry and a time delay microcontroller for silent switching under any conditions, allowing you to use condenser or dynamic microphones with no noise whatsoever. A five millisecond delay is introduced when the switching relay is activated, short enough to go unnoticed by the artist, but long enough for any DC leakage to dissipate, preventing audible noise and ensuring seamless switching during any performance.
Pris exkl.2 620.00
Radial HotShot DM1
R800 1500 00
Radial HotSho DM1 stage mic toggle
The HotShot DM-1™ is a dynamic microphone switcher with a momentary toggle footswitch, allowing an artist on stage to redirect a vocal mic to feed the stage monitoring system and communicate with band members or technicians.
  • Redirects mic signal to communicate with techs
  • Allows band members with in-ear monitors to chat between songs
  • Momentary switch requires foot action to engage
  • Passive design does not require any power to work
Professional stage communication
Designed to address on-stage communication problems for artists who employ in-ear monitoring systems, the HotShot DM-1 is a simple passive footswitch that enables artists on stage to quickly reroute their signal without disrupting the performance. Using the DM-1 is easy - connect any dynamic mic to the input and the send the main XLR output to the mixer, then connect a cable from the second output of the DM-1 to feed a common intercom buss. As soon as you depress the momentary footswitch, the signal going to the main output is muted and redirected to the monitoring system. This allows the musician to discreetly speak with other band members or discuss a technical problem with the crew. As soon as the footswitch is released, the system automatically reverts back to normal operation, allowing the show to continue on as normal.

 

Pris exkl.920.00
Radial HotShot ABi
R800 1508 00
Radial HotShot ABi Footswitch Selector for Balanced Inputs
The HotShot ABi is a balanced signal selector that allows you to instantly select between two sources by depressing a latching footswitch.
  • Quickly select between two balanced XLR sources
  • Toggle or mute the source with a latching footswitch
  • Selectable input pad to match input signal levels
  • Completely passive operation, no power required
On-stage input switching
The HotShot ABi makes it easy to select between two balanced inputs on stage, with a single latching footswitch to toggle from one source to the other. This allows an artist to switch between two dynamic microphones during a performance, freeing up input channels on your mixer. The latching footswitch also opens the door for other useful applications, including using the ABi as a mute to turn off a microphone, select between two wireless receivers, or switch between two mono playback devices.
 
Pris exkl.920.00
Radial HotShot ABo
R800 1509 00
Radial HotShot ABO Footswitch Selector for Balanced Outputs
The HotShot ABo is a latching footswitch that will take a balanced input on stage and switch it between two different destinations, without requiring any power to operate.
  • Redirect a balanced signal to two different destinations
  • Toggle outputs or mute with a latching footswitch
  • Selectable output pads to match signal levels
  • Completely passive operation, no power required
Reroute signals on stage
The Hotshot ABo takes a balanced XLR input and provides the ability to switch the signal between two destinations using a passive footswitch on stage. This makes it ideal for a variety of applications, including driving two channels on a mixing console for dry and wet effects routing, diverting a dynamic mic from the PA system to the monitors or an intercom system, or for temporarily muting the signal when coughing. The ABo uses a latching footswitch, so it will stay on the last output selected until you hit the footswitch again.
Pris exkl.920.00
Radial Voco-Loco
R800 1425 00
Radial Voco-Loco Effects Switcher for Voice or Instrument
Mic Preamp and Effect Loop
The Voco-Loco is a foot-controlled microphone preamp and effects loop switcher that enables a vocalist or acoustic instrumentalist to incorporate guitar effects pedals into their signal path.
  • Add guitar effects pedals to vocal or instrument mics
  • Create exciting and unique effects as you perform
  • Turn on multiple effects with one footswitch
  • Works with dynamic and condenser microphones
Connect any mic to your guitar pedals
The Voco-Loco combines a microphone preamp with a guitar pedal effects loop, allowing a lead vocalist, sax or trumpet player to add guitar pedals to their audio signal path just like an electric guitarist adds effects for soloing. Simply plug your mic into the Voco-Loco via the XLR input, connect your effects pedals using standard ¼" guitar cables, and then send the output from the Voco-Loco to the input on your mixer. Now with the touch of a footswitch you can add your favorite delay, reverb, distortion or wah-wah to any mic'd up instrument or vocal - the options are only limited by your imagination.
Pris exkl.2 900.00
Radial Relay Xo
R800 8030 00
Radial Relay XO Balanced Remote Output Switcher
The Relay Xo is an audio switcher designed to route balanced mic or line-level signals between two separate destinations, with the ability to be operated remotely with an optional JR-1 footswitch.
  • Redirects mic signal to communicate with techs
  • Allows artist to speak with musicians and techs
  • Remote controllable with optional footswitch
  • Link output to switch multiple units at once
 
Reroute signals on stage
Designed to address on-stage communication problems for artists who employ in-ear monitoring systems, the Relay Xo is a remotely controlled active switcher that enables artists on stage to quickly reroute their signal without disrupting the performance. Connect the output of a dynamic microphone or wireless receiver to the Relay Xo input, then feed output-A to the PA system, and output-B to a common intercom buss. As soon as the Relay Xo is switched, it cuts the signal feeding the PA and redirects it to the monitoring system, allowing the musician to discreetly speak with other band members or the crew.
 
Remote access
When artists that employ wireless microphones on tour, the receivers are typically located off stage. The remote input on the Relay Xo allows it to be connected next to the wireless receivers to reduce cable clutter, while still providing control to the artist on stage with a remote footswitch. Two versions of the Radial JR1 footswitch are available for use with the Relay Xo; the JR1-M with a momentary switch that will activate output-B as long as the footswitch is held down, and the JR1-L with a latching switch that will hold on the last selected output.
Pris exkl.1 920.00
Radial SW8-USB
R800 8101 00
Radial SW8-USB USB Interface and Auto-Switcher
Auto-Switcher and USB interface
The Radial SW8-USB is a streamlined solution for employing redundant playback systems on stage, with dual USB inputs that allow you to connect directly to your primary and backup computers, providing eight channels of high quality audio and peace of mind during a live performance.
  • Switch between redundant playback systems
  • Two USB inputs eliminates the need for additional audio interfaces
  • Manual or seamless automatic switching
  • Line level or transformer-isolated mic level outputs
  • Synchronize both playback systems using MTC
  • + More Features
The all-in-one backing track solution
The SW8-USB is the complete solution for performances that utilize redundant playback systems for backing tracks, combining two built-in high performance USB interfaces with an auto-switching feature that detects dropouts and effortlessly switches to the backup computer in an instant. Dual USB inputs with separate 24bit/192kHz converters allow two computers to be connected in tandem, so digital workstations on both machines can connect to the SW8-USB as an audio and MIDI interface. Start/stop synchronization is also possible between both computers through MTC, ensuring flawless switching between playback rigs with less equipment than ever.

 

 

Pris exkl.20 790.00
Radial SW8
R800 8100 00
Radial SW8 Auto-Switcher
The Radial SW8™ is an 8-channel auto-switcher that allows you to set up a redundant backup system by automatically switching between two multi-channel playback systems.
  • Switch between redundant playback systems
  • Manual or seamless automatic switching
  • Line level or transformer isolated mic level outputs
  • May be linked for larger playback systems
Under the Hood
Designed primarily for live concerts and stage shows where backing tracks are used for orchestration, vocals and sound effects, SW8 employs an adjustable gate to detect a machine malfunction and automatically switch to a second backup machine to deliver a seamless performance. The SW8 will monitor any continuous audio signal such as SMPTE on the main playback system, and should the signal drop it will automatically switch to the backup. Switching can also be performed manually on the front panel, or by using a footswitch such as the Radial JR2. For larger systems beyond 8 channels, multiple SW8s may be linked together.
 
Pris exkl.14 020.00
Radial BackTrack - Stereo audio switcher
R800 8102 00
Radial BackTrack Stereo Backing Track Switcher
The Backtrack™ is a compact stereo audio switcher, perfect for bands running redundant backing tracks on stage or switching between any stereo audio sources.
  • Switch between two stereo backing track sources on stage
  • Easily connect playback devices with ¼” and 3.5mm TRS jacks
  • Headphone output for silently cueing up tracks
  • Transformer isolated main outputs eliminate hum and buzz
Protect against playback failure
For any performance that incorporates backing tracks or other pre-recorded elements, reliability is crucial to ensuring a smooth performance. Unfortunately, smartphone batteries die, laptops freeze up, and Murphy's Law will always apply. The Backtrack creates a redundant system to ensure that you can instantly switch over to a backup device should any problems arise with your primary playback source. This can be accomplished easily with the push of a button on the Backtrack or via a remote JR-2 footswitch, giving you peace of mind and freeing you up to focus on your performance without worry.
Pris exkl.3 830.00
Radial SW4 - Stereo AB input switcher
R800 8110 00
Radial SW 4 Four Channel Audio Switcher
The Radial SW4 is a four channel balanced audio switcher designed to connect to multiple mixing consoles or wireless systems, providing greater operational flexibility or backup capabilities in a live performance or concert setting.
  • Switch up to 4 sets of wireless systems
  • Link channels for stereo or quad switching
  • Toggle between two consoles at festivals
  • Transformer isolated to eliminate noise
Silent console switching
The SW4 allows you to connect two mixing consoles to the same set of outputs, perfect for festivals or venues that switch from one console to another between acts. Each of the four channels features XLR inputs and transformer-isolated outputs to eliminate hum and buzz from ground loops, and they can be linked together to switch simultaneously. Channel-1 has a A+B mix function that sums both inputs together - allowing a wireless mic for the MC to be always active, while PFL switches and headphone outputs allow a technician to monitor any channel to ensure seamless playback. Since individual channels can be switched on their own, the SW4 can also be used to switch multiple wireless systems, playback devices, or any balanced audio sources.
Pris exkl.14 020.00

Produkten har lagts i din varukorg Visa varukorgenTill kassan