Fästen

The Miniature Clip, Small is a specially-designed clip for quick and easy chest mounting of our d:screet™ Miniature Microphones.

This holder is available in black and white. It can be purchased as a single unit or in a 10 piece set.

The holder replaces the DMM0004, which does not fit the reinforced d:screet™ Omnidirectional Microphones. The holder is backwards compatible with the non-cable reinforced d:screet™ Miniature Microphones via an included sliced-cable relief.

The Miniature Clip, Small is a specially-designed clip for quick and easy chest mounting of our d:screet™ Miniature Microphones.

This holder is available in black and white. It can be purchased as a single unit or in a 10 piece set.

The holder replaces the DMM0004, which does not fit the reinforced d:screet™ Omnidirectional Microphones. The holder is backwards compatible with the non-cable reinforced d:screet™ Miniature Microphones via an included sliced-cable relief.

The SCM0008 Miniature Clip, Double Lock is a double clip specially designed for quick and easy mounting of a d:screet™ Miniature Microphone on the chest of a speaker. When mounting the microphone on the two holes, cable noise is attenuated dramatically.

This holder is available in black and white.

The holder replaces the DMM00084, which does not fit the d:screet™ Omnidirectional Microphones. The holder is backwards compatible with the non-cable reinforced d:screet™ Miniature Microphones via an included sliced-cable relief.

The SCM0008 Miniature Clip, Double Lock is a double clip specially designed for quick and easy mounting of a d:screet™ Miniature Microphone on the chest of a speaker. When mounting the microphone on the two holes, cable noise is attenuated dramatically.

This holder is available in black and white.

The holder replaces the DMM00084, which does not fit the d:screet™ Omnidirectional Microphones. The holder is backwards compatible with the non-cable reinforced d:screet™ Miniature Microphones via an included sliced-cable relief.

A versatile, 4-way clip for our d:screet™ omnidirectional lavalier microphones. It allows you to mount the mic in an upwards, downwards, left- or right-side position.

This lavalier clip is used with omnidirectional microphones that pick up sound perfectly, no matter which direction the microphone is placed in. The rear cable hook controls cable run behind clothes and minimizes the mic’s visual appearance.

This clip is available in black only. It does not fit d:screet™ Heavy Duty mics. If you need a clip for a Heavy Duty, choose the SCM0001 Miniature Microphone Clip for Heavy Duty Microphones.

The clip offers:

• Fast and secure mounting
• Upwards / downwards mounting
• Left- / right-side mounting
• Multiple cable-management mounts

It fits the following microphones:

d:screet™ Slim 4160 Omnidirectional Microphone and the d:screet™ 4060 Series Omnidirectional Miniature Microphone.

Holder for d:screet™ Miniature Microphones. It creates distance to the capsule, minimizing noise created from clothes and fabric contact. It is flexible – you can use it for both left- and right-side mounting.

This holder is used with omnidirectional microphones that pick up sound perfectly, no matter which direction the microphone is placed in. The rear cable hook controls cable run behind clothes and minimizes the mic’s visual appearance.

This holder is available in black and white. It can be purchased as a single unit or in a 10 piece set.

The holder replaces the DMM0017, which does not fit the reinforced d:screet™ Omnidirectional Microphones. The holder is backwards compatible with the non-cable reinforced d:screet™ Miniature Microphones via an included sliced-cable relief.

Holder for d:screet™ Miniature Microphones. It creates distance to the capsule, minimizing noise created from clothes and fabric contact. It is flexible – you can use it for both left- and right-side mounting.

This holder is used with omnidirectional microphones that pick up sound perfectly, no matter which direction the microphone is placed in. The rear cable hook controls cable run behind clothes and minimizes the mic’s visual appearance.

This holder is available in black and white. It can be purchased as a single unit or in a 10 piece set.

The holder replaces the DMM0017, which does not fit the reinforced d:screet™ Omnidirectional Microphones. The holder is backwards compatible with the non-cable reinforced d:screet™ Miniature Microphones via an included sliced-cable relief.

The Miniature Clip is a specially-designed clip for quick and easy chest mounting of our d:screet™ 4660 Series Heavy Duty Miniature Microphones. The length of the clip ensures stable mounting even on thin clothing. The rubber piece inside the clip is for holding a short cable loop, which will increase the systems immunity to cable noises.

The d:screet™ 4660 Series Heavy Duty Miniature Microphone can be mounted in three different ways using the Miniature Clip.

The holder replaces the DMM0001, which does not fit the d:screet™ Heavy Duty Miniature Microphone or the reinforced d:screet™ Omnidirectional Microphones.

DMM0007 Universal Surface Mount is a soft rubber holder for Miniature Microphones on numerous instruments, using a special non-marking adhesive, allowing the microphone to be placed at virtually any location on the musical instrument.

 

This adhesive, while providing a firm location for microphone mounting, retains its ability to adhere through multiple uses.

 

The holder is supplied in a box of 5 with 20 adhesive discs to extend the stick-on time.

DMM0011-B is a very strong magnet holder that can hold up to two Miniature Microphones by their cables or one by the housing.

 

The holder is suited for everything magnetic, such as grand and up-right piano (in the frame) or drums with magnetic rims.

The standard delivered single clip for the DPA 4080 Miniature Cardioid Microphone.

 

The unique mounting design around a ball-shaped fixation spot allows the directional microphone to easily be turned in all directions and the clip fits both left and right buttoned shirts.

 

To increase the system's immunity to cable noise, the DMM0014 features a short cable trail for securing the microphone cable.

The DMM0015 is a flexible clip for mounting two DPA 4080 Miniature Cardioid Microphones on a speaker offering optimum safety in terms of backup if one of the wireless channels should fail to function.

 

The 4080's rubber shock mount can easily be dismounted from its enclosed clip (DMM0014) and attached to one of the ball-shaped fixation spots on the DMM0015 Double Clip.

 

To increase the system's cable noise immunity, the DMM0015 features a short cable trail for securing each microphone cable.

The DMM0016 is a small holder with minimal visual appearance when mounting a DPA 4080 Miniature Cardioid Microphone on a speaker. When mounting on thin fabric, the DMM0016 offers safe and stable use of 4080.

 

The Magnet Mount is supplied with a small iron tag on an elastic necklace for placement inside the clothing behind the magnet.

 

The rubber shock mount holding a DPA 4080 can easily be dismounted from its enclosed clip (DMM0014) and attached to the fixation ball on the DMM0016.

 

This unique fixation design allows the directional microphone to quickly be turned to point in the direction of the performer's mouth.

Specially designed and easy to use double-sided tape pads for the DPA Miniature Concealers. Store tape away from excessive heat and light.

Specially designed and easy to use double-sided tape pads for the DPA Miniature Concealers. Store tape away from excessive heat and light. 500 pcs.

Versatile self-adhesive mounting tape, originally made as toupee tape. Store tape away from excessive heat and light.

Versatile self-adhesive mounting tape, originally made as toupee tape. Store tape away from excessive heat and light.

The BLM6000 is a unique accessory tool that enhances the versatility of your DPA miniature microphone.

 

It is a soft piece of durable rubber with a diameter of 75 mm. It has an underside cavity for mounting a DPA 4060, 4061, 4062 or 4063 microphone.

 

When placing a microphone on a reflective boundary, you will benefit from the special characteristics of the sound field found here - a 6 dB gain of direct sound and just 3 dB gain of the diffuse sound.

 

This means that the sound captured from this so-called "pressure zone" has higher sensitivity, clarity, and intelligibility compared to the sound captured from the "free air" and serves neatly as a kind of acoustical zoom.

 

The BLM6000 can be mounted on all surfaces that reflect sound such as floors, walls or ceilings.

 

Placing a DPA miniature microphone in this little device on the inside lid of an open grand piano also provides a very distinct and crispy sound.

MHS6005 is a pack of 5 pcs of soft rubber providing attachment of a DPA Miniature microphone on violin, viola, cello or double bass.

 

The holders are to be mounted between the tailpiece and the bridge and can be turned upwards or downwards so that the microphone will be placed either over or under the strings after desired sound colour taste or sound level.

 

The miniature microphone is secured by its cable in a little clip, while the holder itself has a firm grip on two strings of the instrument with small hooks.