Din webbläsare stöds ej. För bästa upplevelsen rekommenderas en nyare version eller en annan webbläsare.
För att ge dig bättre service använder vi cookies. Genom att fortsätta på sidan godkänner du vår användning av cookies.

Förstärkare

ATC P1 PRO Dual Mono Power Amp
PRO-P1-AMP
P1 Pro – Dual-Mono Power Amplifier
  • True dual-mono design delivers full power simultaneously from both channels, with minimal crosstalk
  • Grounded source class A/B circuit topology as found in ATC’s renowned active loudspeakers.
  • Ultra wide bandwidth, low distortion and high dynamic range ensure tonal accuracy and perfectly timed transients.
  • No compromise, high performance power supply and large heatsinks guarantee outstanding stability and long term reliability.
  • A perfect match for any passive studio reference monitor.
  • 19” Rack mountable convection cooled chassis
  • Hand built in the UK and supported by a 6 year warranty.
Output Power into 8 Ω: 150W (8 Ω, 1kHz, continuous. avg., both channels driven)
Input Sensitivity: 2V RMS (ref. 150W out)
Input Impedance: 10kΩ/leg
Frequency Response: <2Hz – >400kHz (-3dB)
Signal to noise ratio: >115dB (IEC ‘A’)
Crosstalk: >100dB (10Hz – 20kHz)
THD: >0.002%/-95dB (8 Ω, 1kHz, -1dB below full Power)
Damping Factor: >400 (8 Ω)
Dimensions (HxWxD): 141.1×482.6×365.6mm (3U tall with feet removed)
Weight: 20kg
Pris exkl.28 000.00
ATC P2 PRO Dual Mono Power Amp
PRO-P2-AMP
P2 Pro – Dual-Mono Power Amplifier
  • 300W per channel.
  • True dual-mono design delivers full power simultaneously from both channels, with minimal crosstalk
  • Grounded source class A/B circuit topology as found in ATC’s renowned active loudspeakers.
  • Ultra wide bandwidth, low distortion and high dynamic range ensure tonal accuracy and perfectly timed transients.
  • No compromise, high performance power supply and large heatsinks guarantee outstanding stability and long term reliability.
  • A perfect match for any passive studio reference monitor.
  • 19” Rack mountable convection cooled chassis
  • Hand built in the UK and supported by a 6 year warranty.
Output Power: 300W (8 Ω, 1kHz, continuous. avg., both channels driven)
Input Sensitivity: 2V RMS (ref. 150W out)
Input Inpedance: 10kΩ/leg
Frequency Response: <2Hz – >400kHz (-3dB)
Signal to Noise Ratio: >115dB (IEC ‘A’)
Crosstalk: >100dB (10Hz – 20kHz)
THD: >0.002%/-95dB (8 Ω, 1kHz, -1dB below full Power)
Damping Factor: >400 (8 Ω)
Dimensions (HxWxD): 141.1×482.6×365.6mm (3U tall with feet removed)
Weight: 24kg
Pris exkl.36 300.00
ATC P4 PRO MONONBLOCK
PRO-P4-AMP
P4
  • 4 channel 3-way mono-block design.
  • ATC class A/B “Grounded Source Topology”.
  • 850W  total output.
  • 4th order active crossovers with phase correction.
  • Fast FET soft limiting driver protection.
  • Triple fan cooling.
  • 6 year warranty.
  • Only available as part of an ATC active loudspeaker system.
Output Power: HF 100W into 6Ω, Mid 200W into 16Ω, LF 275W x 2 into 8Ω
Input Sensitivity: 2V
Input Inpedance: 10kΩ
Frequency Response: 5Hz – 20 kHz ±0.1dB
Signal to Noise Ratio: Better than 105dB
Crosstalk: Better than 90dB
Power Requirements: 100, 115, 230 Volts (region dependant 50/60Hz factory set)
Dimensions: 19˝ Rack Mounting 5U high (222mm / 8.7˝), Overall Depth 538mm (21.2″), Front Panel and Handles 71mm (2.8˝), Rear Handles 40mm (1.6˝), Amplifier Body 427mm (16.8˝ )
Weight: 40kg approx.
Pris exkl.77 500.00

Produkten har lagts i din varukorg Visa varukorgenTill kassan