För att ge dig bättre service använder vi cookies. Genom att fortsätta på sidan godkänner du vår användning av cookies.

Line Array

Filtrera & sortera
Antal artiklar 12
d&b V8 Loudspeaker NLT4F/M
Z0515.002
The V8 is a 3-way passive design housing 2 x 10" LF drivers, one hornloaded 8" MF driver and two 1.4" exit HF compression drivers with 2.5" voicecoils mounted to a dedicated waveshaping device. The symmetrical dipolar arrangement of the neodymium LF drivers around the centrally mounted coaxial MF and HF components allows a smooth overlap of the adjacent frequency bands in the crossover design. This results in an exceptional 80° horizontal constant directivity dispersion control nominally being maintained down to 250 Hz. The mechanical and acoustical design enables flown vertical arrays of up to twenty four loudspeakers. It can be used in columns of purely V8 loudspeakers or combined with V12s and / or with V-SUBs. The V8 cabinet is constructed from marine plywood and has an impact and weather protected PCP (Polyurea Cabinet Protection) finish. The front of the loudspeaker cabinet is protected by a rigid metal grill backed by an acoustically transparent foam. Each side panel incorporates a handle, while two additional recessed grips are provided at the rear bottom of the cabinet.
Pris exkl.80 900.00
d&b V12 Loudspeaker NLT4F/M
Z0516.002
The V12 is a 3-way passive design housing 2 x 10" LF drivers, one hornloaded 8" MF driver and two 1.4" exit HF compression drivers with 2.5" voicecoils mounted to a dedicated waveshaping device. The symmetrical dipolar arrangement of the neodymium LF drivers around the centrally mounted coaxial MF and HF components allows a smooth overlap of the adjacent frequency bands in the crossover design. This results in an exceptional 120° horizontal constant directivity dispersion control nominally being maintained down to 250 Hz. The mechanical and acoustical design enables flown vertical arrays of up to twenty four loudspeakers. It can be used in columns of purely V12 loudspeakers or combined with V8s and / or with V-SUBs. The cabinet is constructed from marine plywood and has an impact and weather protected PCP (Polyurea Cabinet Protection) finish. The front of the loudspeaker cabinet is protected by a rigid metal grill backed by an acoustically transparent foam. Each side panel incorporates a handle, while two additional recessed grips are provided at the rear bottom of the cabinet.
Pris exkl.80 900.00
d&b V Flying frame
Z5380.000
d&b V Flying frame
Pris exkl.28 320.00
d&b V Flying adapter
Pris exkl.6 100.00
Pris exkl.1 780.00
d&b Rota clamp
Z5147.001

Rota Clamp

The Z5147 Rota clamp enables the horizontal alignment of the cluster by suspending it from a single flying point using the centre plate of the mounting frame. The Rota clamp allows a WLL of 250 kg (551 lb) and can be suspended from overhead bars or truss with a tube diameter up to 51 mm (2").

Pris exkl.5 430.00
d&b V Hoist connector chain
Pris exkl.1 780.00
d&b V Safety chainset
Pris exkl.2 700.00
d&b Touring case 2 x V8 / V12
Pris exkl.12 680.00

Produkten har lagts i din varukorg Visa varukorgenTill kassan