För att ge dig bättre service använder vi cookies. Genom att fortsätta på sidan godkänner du vår användning av cookies.

T Line Array

Filtrera & sortera
Antal artiklar 14
d&b T10 Loudspeaker NLT4F/M
Z0550.002
T10
Line array / Point sources
2-way loudspeaker with rotatable horn for point and line source operation
  • Components 2 x 6.5"/1.4"
  • Dispersion 90° x 35° / 105°
  • SPLmax 130 / 132 dB
  • Weight 11 kg
Product description
The T10 is a passive 2-way loudspeaker housing two 6.5" drivers positioned in a dipolar arrangement and a 1.4" HF compression driver and a passive crossover network. The T10 can be used both as a line array and as a high directivity point source loudspeaker. The HF driver is fitted to a unique waveguide horn producing vertical line source directivity with a 90° horizontal pattern that is maintained down to approximately 600 Hz. An acoustic lens placed in front of the horn widens horizontal dispersion to 105°, rotation of the horn by 90° relative to this produces an accurate point source dispersion, transforming a vertically oriented T10 into a stand-alone full range loudspeaker with 90° horizontal and 35° vertical directivity pattern. The T10 cabinet is constructed from polyurethane integral hard foam, incorporates integrated line array rigging hardware and has an impact resistant finish. The front of the loudspeaker cabinet is protected by a rigid metal grill backed by an acoustically transparent foam, and two EP5 or NL4 connectors wired in parallel are mounted on the rear panel.
Amplifiers
The d&b D20 and 30D amplifiers are recommended to drive the T10. The d&b D80, 10D and D6 can also be used.
Pris exkl.36 500.00
d&b T Subwoofer NLT4F/M
Z0560.002
T Subwoofer
  • Compact flyable subwoofer
  • Components 15"
  • Dispersion Omni directional
  • max SPL 130 dB
  • Weight 17 kg
The T-SUB is an actively driven bass-reflex loudspeaker fitted with a high excursion 15" driver. d&b SenseDrive technology is available when powered by the D12 amplifier. It can be used to supplement the LF headroom of the T10 loudspeaker in various combinations, ground stacked or flown, either integrated on top of a T10 array or as a separate column. The loudspeakers are mechanically connected using rigging links on both sides of the cabinet front, which slide out when needed, and with a central splay link at the rear of the cabinet. The T-SUB cabinet is constructed from marine plywood with an impact resistant paint finish and a handle in the top panel. The front of the loudspeaker cabinet is protected by a rigid metal grill in front of an acoustically transparent foam and two EP5 or NL4 connectors wired in parallel are mounted on the rear panel.
Amplifiers
The d&b D20 and 30D amplifiers are recommended to drive the T-SUB. The d&b D80, 10D and D6 can also be used.
Pris exkl.29 200.00
d&b T Base plate
Z5375.000
T Base Plate
  • The Z5375 T Base plate must only be used in conjunction with d&b T10 loudspeakers as described in these mounting instructions.
  • The Z5375 T Base plate is designed to support up to three T10 Line array cabinets in a ground stacked setup and is equipped with three rubber feet.
  • The Z5375 T Base plate is not intended for flown use.
  • When used on top of d&b subwoofers such as Q-SUB, E15X-SUB, B4-SUB or V-SUB, the T Base plate is secured to the subwoofer using the M20 flange in the top panel of the subwoofer. It can then support a column of up to six T10 cabinets.
Pris exkl.2 310.00
d&b T Flying frame
Z5370.000
T Flying Frame
The T Flying frame is designed to support a maximum of twenty T10 loudspeakers and has a mounting plate that accepts inclinometers such as the Teqsas Lap-TEQ line array positioning tool. All necessary rigging components are mounted to the cabinet and slide out when needed. Splay angles between adjacent cabinets can be set in the range from 0° to 15° in 1° steps. The T subwoofer can also be attached to the T Flying frame either at the top of an array with subsequent T10 loudspeakers attached or as a column of T subwoofers.
Pris exkl.11 600.00
d&b Rota clamp
Z5147.001

Rota Clamp

The Z5147 Rota clamp enables the horizontal alignment of the cluster by suspending it from a single flying point using the centre plate of the mounting frame. The Rota clamp allows a WLL of 250 kg (551 lb) and can be suspended from overhead bars or truss with a tube diameter up to 51 mm (2").

Pris exkl.5 430.00
d&b Shackle 1 ton
E6507.000.00
d&b 1 t shackle.
Pris exkl.160.00
d&b T Cluster bracket
Z5373.000
T10 arrays using three cabinets can be configured using the T Cluster bracket along with a loudspeaker stand, mounted withthe loudspeaker stand adapter or flown using the TV spigot with fixing plate.
Pris exkl.1 790.00
d&b Loudspeaker stand adapter
Z5024.000.00
This adapter is used to mount loudspeakers on to the standard 35 mm diameter column commonly used for loudspeaker stands.
Pris exkl.550.00
d&b Loudspeaker stand winder M20
Z5013.000.00
d&b M20 högtalarstativ med vev.
Pris exkl.2 370.00
d&b Loudspeaker stand with winder
Z5009.000.00
Loudspeaker stand with winder.
Pris exkl.3 640.00
d&b Q Hoist connector chain
Z5155.000
The Z5155 Q Hoist connector chain is used to connect the lifting motor(s) to the Q Flying frame using one or two 1t Shackles supplied with the connector chain. Its length of 52 cm allows enough space for the hang of most 1t motor chain containers
Pris exkl.2 490.00
d&b Touring case 2xT Flying frame
Pris exkl.9 760.00
Pris exkl.12 180.00
d&b Touring case 2 x T-SUB sleeve
Pris exkl.12 350.00

Produkten har lagts i din varukorg Visa varukorgenTill kassan