För att ge dig bättre service använder vi cookies. Genom att fortsätta på sidan godkänner du vår användning av cookies.

Reamping

Filtrera & sortera
Antal artiklar 9
Radial X-Amp
R800 1028 00
Radial X-AMP Active Reamp
The Radial X-Amp™ is an active Reamper™ that allows the engineer to play a pre-recorded track back through guitar amplifiers and pedals. This opens the door to explore new musical sounds and spur on the creative process so that your recording stands out.
  • Active Reamp® with two outputs
  • 100% discrete class-A signal path
  • Transformer isolated to eliminate noise
  • LED peak indicator and level control
Reamp for professionals
Following the critically acclaimed Radial JD7™ Injector, the X-Amp employs a unique class-A circuit design that has been optimized for use with guitars. Features include balanced line level input with LED peak indicator and level control, class-A circuit topology for optimal reach and frequency response, a transformer isolated output to eliminate hum and buzz caused by ground loops, a 180° polarity reverse switch to bring both amps into phase, and a dual ground lift switch for noise-free operation.
Pris exkl.2 070.00
Radial Reamp JCR passive
R800 1030 00
Radial JCR Studio Reamper
Original Reamp Circuit
The Reamp® JCR™ is a passive Reamper™ that allows you to take a prerecorded track and send it back to a guitar or bass amplifier and re-record it. The benefits are tremendous: instead of worrying about the sound of the track, you can focus your attention on getting the best musical performance. Once the magic has been captured, you can send the guitarist home and Reamp the track at will as you move the mics around the room, try various amplifiers or introduce effects. Best of all, you can Reamp the track later as the production develops.
  • Lets you re-record tracks through a guitar or bass amp
  • Original Reamp® circuit designed by John Cuniberti
  • Plug and play easy to use passive design
  • Improves productivity while expanding creative options
Play now, perfect later
The Radial Reamp JCR is the latest version of the original Reamp that was designed and patented by John Cuniberti. It features a 100% passive design with John's original custom wound 'Made in the USA' transformer and circuit. The latest Radial version features separate XLR and ¼" TRS input connectors, variable output level plus a three-position filter that lets you tame excessive highs, warm up the lows or simply bypass if you want to revert to the original circuit. An on-board mute function has also been added to allow you to shut off the signal going to the amps when making adjustments or moving mics around the studio.

 

 

Pris exkl.2 070.00
Radial ProRMP
R800 1125 00
Radial ProRMP Studio Reamper
For years, Reamping has been the ‘secret weapon’ for countless recordings by the biggest names in the business! Few realize that recording engineers not only Reamp guitars, but often Reamp bass, keyboards, drums and even voice as a means to bring creative new tones and sonic signatures to their music.
  • Play pre-recorded tracks through amps and pedals
  • On board level control for fine tuning amp level
  • Transformer isolated to eliminate buzz and hum
  • Opens the door to creative new tones and textures
Reamping for every studio
The Radial ProRMP is a 100% passive Reamper. This means it does not require any external powering. The magic behind the ProRMP's great tone is a custom wound transformer that at once converts the balanced line level source to a hi-z output for your amp while also acting as an electrical isolator to eliminate troublesome ground loops that can often cause buzz and hum in the sound. Plug and play easy to use, the ProRMP connects from the recorder to your amp and effects units and does all the impedance matching for you. Just adjust the level to suit!

 

Pris exkl.1 080.00
Radial Re-amper kit
R800 1200 00
Radial Reamp Kit J48 & X-Amp
  • Combination J48 and X-Amp in convenient kit
  • Use the J48 DI for recording the track
  • Use the X-Amp to Reamp back to your amps
  • Foam-filled full surround Zebracase included
The Radial Reamp Kit includes everything you need to Reamp in a single case. Start by recording with the industry standard Radial J48 direct box. This active DI is ideal for Reamping as it will not load down the pickups and will deliver the true sound of the instrument without distortion or artifact.
Then Reamp to your hearts content using the Radial X-Amp Reamper. This active Reamper has two buffered outputs for twice the fun! Run two amps at the same time, add pedals… try Reamping bass, drums and keys. Once you get started you will wonder how you ever recorded without it.
Pris exkl.4 170.00
Radial SGI
R800 1600 00
Radial SGI Guitar Interface System
The SGI™ is a high performance line driver system for guitars that takes an unbalanced instrument signal and allows you to drive it as far as 100 meters (300ft) without noise.
  • Balanced line driver for guitar and bass
  • Send signal over 100 meters (300ft) without loss
  • 100% discrete class-A circuit with Drag control
  • Delivers natural tone to off-stage amplifiers
Take your tone further
The SGI sends guitar signals across long distances without signal loss or noise, while retaining the original tone of the instrument. In the studio, it allows the guitarist to sit in the control room and connect to a distant guitar amp. On stage, the SGI can be used to play the guitar amp using off-stage isolation cabinets or it can be used to manage guitar signals to and from wireless systems, pedalboards and amplifiers. The SGI consists of two boxes: the SGI-TX transmitter and the SGI-RX receiver. The connection between the TX and RX is made using a standard balanced XLR microphone cable. To use, you simply plug your guitar into the SGI-TX input and connect your amp from the SGI-RX output and you are set to go. The SGI does all of the balancing, buffering and impedance matching for you.
Pris exkl.2 830.00
Radial EXTC-SA
R800 1420 00
Radial EXTC-SA Guitar Effects Interface
Guitar Effects Interface & Reamp Box
The EXTC-SA™ is a unique interface for connecting guitar pedals to the inputs and outputs of pro audio equipment such as recording interfaces or mixing consoles, allowing you to incorporate your pedals in new and creative ways.
  • Balanced interface for guitar effects pedals
  • Separate send & receive controls optimize signal path
  • Transformer isolation helps eliminate ground loops
  • Creative tool helps your mix stand out from the rest
Reamp and mix through your guitar pedals
The EXTC allows you to get creative with your effects pedals, using them in your mix on any recorded track. Add a touch of distortion or chorus to a lead vocal, flange on a violin, or fuzz on piano - the possibilities are endless. The EXTC takes the line level balanced output of your recording interface and converts it so an instrument level high-Z output optimized for guitar effects pedals, so you can Reamp any track through your pedalboard with ease. Once you've run the signal through your pedals, connect the output back into the EXTC and it will boost it up to a balanced line level so you can connect directly to the input of your recording interface. The EXTC features Radial's class-A buffer for the best audio quality and transformer isolation to eliminate any buzz or hum - so you can focus your attention on using your pedals in new and exciting applications.
Pris exkl.3 090.00
Radial JD7
R800 7000 00
Radial JD7 Studio Guitar Distribution and Splitting
The JD7™ is a guitar signal splitter that is able to drive as many as seven amplifiers at the same time without introducing noise, signal loss, or hum and buzz from ground loops.
  • Drive up to 7 amplifiers and 2 effects loops at the same time
  • Jensen transformer isolation eliminates hum and buzz
  • Built-in Radial Direct box and Reamp capabilities
  • Drag control load correction for natural tone
Natural tone, quiet operation
The JD7 allows you to feed up to seven amplifiers simultaneously, with premium Jensen transformers on the outputs that ensure distortion-free signal transfer while blocking hum and buzz from ground loops. To help retain the natural tone of your instrument, Drag control load correction is also featured on the input so you won't lose the tone and feel of connecting your guitar directly to an amplifier.
Record direct and Reamp through multiple amps
The JD7 has a built-in Radial DI box, so you can take a clean guitar track directly to your recording interface while simultaneously playing through multiple amplifiers. A Reamp input allows you to send your recorded guitar track from your recording device back through any or all of your amps, so you can focus on the performance and have the freedom to tweak your amps and microphones later on.
Pris exkl.13 430.00
Radial JX44
R800 6500 00
Radial JX44 Concert Touring Guitar & Amp Signal Manager
The Radial JX44™ is a guitar signal manager and switcher designed for the most demanding professional concert stages where wireless guitar systems, acoustics, effects and multiple amplifiers are used simultaneously.
  • Select between up to 4 guitars and 6 amps
  • Programmable with optional JR5 footswitch
  • Built in DI box, SGI line driver and X-Amp Reamper
  • Transformer isolated to eliminate ground loops
The ultimate guitar signal manager
The JX-42 is the most complete guitar and amp switching and routing system available for professional concert touring, providing you with the ability to connect and manage up to four guitars, six amplifiers, an effects chain and a remote pedalboard with seamless integration throughout. Optional JR-5 remote footswitches can be used to select the inputs and outputs individually or to program and recall scenes to activate multiple amplifiers with a single footswitch. A local effects loop can be used to connect rackmount signal processors, and an SGI line driver is built-in to feed distant pedalboards with ease when used with the SGI-44 remote guitar interface. An assignable direct box output is also featured, and the JX-42 can be used to reamp balanced line-level signals, with front panel status indicators to provide an easy systems check at a glance.
Pris exkl.18 460.00
Radial SGI44
R800 6700 00
Radial SGI-44 Guitar Signal Extender
The SGI-44™ is a line driver for guitars and basses that connects to the JX-44 to allow a remote pedalboard to be connected without signal loss or noise.
  • Balanced line driver for JX-44 guitar & amp switcher
  • Send signal over 100 meters (300ft) without loss
  • 100% discrete class-A circuit with Drag control
  • Bidirectional send & receive effects router
Connect to your pedalboard remotely
The SGI-44 can send guitar signals over long distances without signal loss or noise, with built-in send and receive functions for bidirectional signal routing. When used in conjunction with the JX-44 guitar and amp switcher, it allows you to keep your pedalboard at your feet on stage, while instrument switching and amp control is managed remotely by your stage tech. A pair of SGI-44s can also be used together to extend the effects loop of your amplifier to any point on stage, so you can keep your favorite pedals connected to the amp's effects loop no matter how far away your amp is located. The SGI-44 takes care of all the balancing, buffering, and impedance matching to ensure your signals are delivered without noise or distortion.
Pris exkl.4 200.00

Produkten har lagts i din varukorg Visa varukorgenTill kassan